Automation systems DZNM CA-PPN.M et al .

Microprocessor-based furnace automation systems are designed to automate furnaces, track heaters, steam and hot water boilers, etc. A distinctive feature of the systems is the use of microprocessor technology.

Models: SA-PPN.M, SA-APG.M

• SA-PPN.M. Technical characteristics.
• SA-APG.M. Technical characteristics.

The spark ignition unit of the electric igniter is designed for spark ignition of gas burners of oil heating units (PTB-10, PTB5), oil treatment units (USPN-1000, -250M), track heaters (PP-0.63A, PP-1.6A), track heaters with intermediate coolant (PPT-0.2G, PPT-0.2GJ, etc.), flare installations (FMS 50-900), mobile steam heating installations (PKN-G(M), as well as various brands of hot water and steam boilers operating on both gas and liquid fuel.

Models: BIR-M

Liquid level alarms provide control over the maximum or required liquid level in automation systems and two-position water level control in steam boilers, in open process tanks in various sectors of the national economy.

Models: Level-2M

The ignition device is a complex of means designed for ignition of gas and liquid process burners.

Models: ZU-1

The liquid level sensor is designed to monitor the liquid level and the separation level of two immiscible liquids by issuing a discrete electrical signal in various technological devices.

Models: DUZH-1M

The valve control column DN 100 – 1200 mm is designed for remote control of valves, can be used at a pipeline laying depth of up to 7 m.

Models: T-3124

The control unit of the rocking machine is designed to control and monitor the operation of the electric motor of the drive of rod pumps (rocking machines), with a capacity from 5.0 to 55.0 kW.

Models: BUS-4

Questionnaire